Native IOS 65xx系列交换机配置( 四 )

If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C6509 (R7000) processor (revision 3.0) with 458752K/65536K bytes of memory.
Processor board ID SAL0743NKW8
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from power-on
X.25 software, Version 3.0.0.
Bridging software.
1 Virtual Ethernet/IEEE 802.3 interface(s)
48 FastEthernet/IEEE 802.3 interface(s)
36 Gigabit Ethernet/IEEE 802.3 interface(s)
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.
65536K bytes of Flash internal SIMM (Sector size 512K).
Standby is up
Standby has 458752K/65536K bytes of memory.
Configuration register is 0x2102QQRead.com 推出数据恢复指南教程数据恢复指南教程数据恢复故障解析常用数据恢复方案硬盘数据恢复教程数据保护方法数据恢复软件专业数据恢复服务指南
Router#sho module all
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
2 16 16 port 1000mb GBIC ethernet WS-X6416-GBIC SAL0750QNJP
3 16 16 port 1000mb GBIC ethernet WS-X6416-GBIC SAL0750QNFV
5 2 Supervisor Engine 720 (Active) WS-SUP720-BASE SAD075000YF
6 2 Supervisor Engine 720 (Warm) WS-SUP720-BASE SAD075109SZ
7 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45 SAL0752R3E6
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
2 000e.8442.4850 to 000e.8442.485f 2.5 5.4(2) 8.2(0.56)TET Ok
3 000e.8442.48f0 to 000e.8442.48ff 2.5 5.4(2) 8.2(0.56)TET Ok
5 000d.290f.fd08 to 000d.290f.fd0b 3.0 7.7(1) 12.2(17a)SX1 Ok
6 000e.3838.1a8c to 000e.3838.1a8f 3.0 7.7(1) 12.2(17a)SX1 Ok
7 000e.84c8.54f0 to 000e.84c8.551f 6.8 5.4(2) 8.2(0.56)TET Ok

Mod Sub-Module Model Serial Hw Status
--- --------------------------- ------------------ ------------ ------- -------
5 Policy Feature Card 3 WS-F6K-PFC3A SAD0752009D 2.0 Ok
5 MSFC3 Daughterboard WS-SUP720 SAD075109HX 2.0 Ok
6 Policy Feature Card 3 WS-F6K-PFC3A SAD0751085J 2.0 Ok
6 MSFC3 Daughterboard WS-SUP720 SAD0751077C 2.0 Ok
7 Inline Power Module WS-F6K-PWR 0.0 Ok
Mod Online Diag Status
--- -------------------
2 Pass
3 Pass
5 Pass
6 Pass
7 Pass
3.3. 配置机器名、telnet、密码
在全局模式下，用conf t，进入配置模式，进行以下配置：
#conf t
#clock timezone GMT 8 ；配置时区
#clock set 13:30:21 31 JAN 2004 ；配置交换机时间
#clock calendar-valid ；使能硬件时钟同步
#service timestamps debug datetime localtime ；配置系统debug记录时间格式
#service timestamps log datetime localtime ；配置系统日志记录时间格式
#service password-encryption ；配置使用加密服务，主要针对口令加密
#hostname xxxx ；配置交换机名称
#enable secret 0 xxxxx ；配置enable口令
#copy run start ；将配置信息保存到NVRAM中，重启动不会丢失
#line vty 0 4 ；配置telnet
#exec-timeout 30 0
#password 0 xxxx
#login
3.4. 配置snmp
#conf t
#snmp-server community cisco ro（只读）；配置只读通信字符串
#snmp-server community secret rw（读写）；配置读写通信字符串
#snmp-server enable traps ；配置网关SNMP TRAP
#snmp-server host 10.254.190.1 rw ；配置网关工作站地址
3.5. 启动三层功能
#ip routing ；启动路由功能
3.6. 查看和配置系统环境变量
使用show bootvar命令查看系统启动环境变量，包括BOOT, BOOTLDR, and CONFIG_FILE参数：
Router# show bootvar
BOOT variable = slot0:c6sup22-jsv-mz.121-5c.EX.bin,1;